ADDRESS

wiseWood veneer ++ 5490 Gatewood Dr. ++ Sterling Heights, MI 48310 ++ Toll free: 855.883.6337 (855.8VENEER)
Local: 586.825.2387 ++ Fax: 586.825.2390 ++ choose@wisewoodveneer.com

June 23, 2011

WiseWood Veneer Adds New Species To Their Stock

WiseWood Veneer is excited to announce the addition of two new exotic species to their ever expanding inventory. The new species include Bubinga and Padauk wood veneer. WiseWood Veneer has taken notice in the trend that has been developing over the years. The beauty and warmth of wood has always been a popular choice, but now more than ever the trend is moving towards exotic species.

Read more.


Bubinga wood veneer, an exotic hardwood that is reddish brown with contrasting darker colored veining which is also often figured. It's available in 4' x 8'sheets in FlexVen™ 10 and FlexVen™ 20 backers with a PSA option. It is generally flat cut and quarter cut (sometimes called rift cut).




Padauk wood veneer, an exotic hardwood that is usually a vivid bold red orange color that ages to a deep crimson brown. It's available in 4' x 8' sheets in FlexVen™ 10 and FlexVen™ 20 backers with a PSA option. It is generally quarter cut (sometimes called rift cut) and flat cut.





June 21, 2011

Featured Product: Sapele, Qtr. Cut 4x8 FlexVen™ 20

This week's featured product is the FlexVen™ 20 quarter cut or ribbon sapele on 20 mil backer.



Quarter cut sapele wood veneer, also known as ribbon stripe sapele wood veneer or ribbon sapeli veneer, is typically a deep pinkish-red brown to a darker rusty brown color. Sapele, Quarter Cut 4 x 8 FlexVen™ 20 is a 20mil 4’ x 8’ (32 sq. ft.) paper backed flexible veneer sheet. It is usually book matched with the grain running along the 8’ dimension......

Read more.


June 15, 2011

Featured Product: Maple, Curly High Figured 4x8 FlexVen™ 10

This week's featured product is the FlexVen™ 10 highly figured curly maple on 10mil backer.



High figure curly maple wood veneer, also known as flat cut flame maple wood veneer or flat cut high figure maple wood veneer, is typically a creamy white to a pink tinged light yellow wood that ages to a deep pale gold color. Maple, Curly high figure FlexVen™ 10 is a 10mil 4’ x 8’ (32 sq. ft.) paper backed flexible veneer sheet. It is usually book matched with the grain running along the 8’ dimension.....

Read more.


June 9, 2011

How to apply pressure sensitive adhesive (PSA) backed veneer.

If you have ever wondered what it takes to successfully apply pressure sensitive adhesive backed wood veneer, below you'll find comprehensive instructions to do just that. Pressure sensitive adhesive (PSA) is very thin acrylic based film applied to 10mil paper backed flexible wood veneer sheets. It is often referred to as "peel and stick" veneer. In recent years this method of applying wood veneer has gained much popularity with professionals and do it yourselfers because of its relative ease of use and no mess application. It also eliminates the need for a hot press and/ or vacuum bag and allows the veneer to be adhered to more nontraditional substrates such as steel and plastic. Although the wood veneer is available in 2' x 8', 4' x 8', and even 4' x 10' sheets the PSA method of application is not very practical for veneering full size panels. PSA wood veneer is easy to apply but it can become very labor intensive especially on large projects with vast surface areas and there are steps to the application that are meticulous. Namely, making sure that every square inch of the surface area has had enough pressure applied to it.



PSA Veneer Application Instructions


Preparation
When you first receive your veneer inspect it thoroughly for satisfaction of grade and quality prior to lamination. Next it’s very important to allow your veneer to acclimate prior to use. This is done by laying the veneer flat on a surface and allowing it to “relax” in your environment for a minimum of 48 hours up to 4 days. It may be necessary to apply some weight on the ends of the sheet to help retain its flatness during this period. The ideal environment for this process is between 35% and 50% relative humidity and temperature levels between 65 to 80 degrees F. It is also important to allow your substrate material to acclimate in the same conditions for the same amount of time as the veneer. This will ensure that materials will be relatively equal in terms of relative moisture and temperature.

Tools and Supplies
Before starting your veneering project you’ll want to gather some basic tools and supplies. You will need 120 grit sandpaper, tack cloth, denatured alcohol, a sharp utility or exacto knife and a veneer scraper. Veneer scrapers can be purchased commercially and typically consist of a wooden handle and a stiff blade of polycarbonate or lexan about 4” wide. You can also make one by using a piece of hardwood approximately 4” wide by 12 to 16” in length. Make sure one end is cut nice and straight and use sandpaper to gently ease the corners and edge to eliminate any sharp lines. If you want you can also contour the upper portion of the handle to create a comfortable grip. With this smoothing blade you will generate excellent leverage and good pressure on the surface. We don’t advocate the use of any type of J-roller for veneer application. You will not generate enough pressure with any type of J-roller.

Surface Preparation
Your substrate, or the surface you are going to laminate, needs to be prepped prior to veneering with PSA veneer. For finished surfaces you will need to scuff sand the entire surface with a medium (120 grit) sandpaper. After sanding remove all sanding dust and residue with tack cloth and wipe the surface clean with denatured alcohol. If you plan to veneer on an unfinished wood surface or plywood it is recommended that you first seal the surface with a coat of varnish, shellac or polyurethane finish. Allow the finish ample drying time, usually 24 hours, and then continue on with the veneer application.

READ THE COMPLETE INSTRUCTIONS HERE.


At WiseWood Veneer we have several popular species with PSA already in stock and we have the capability to apply the adhesive backer to any of our FlexVen™ 10 and FlexVen™ 20 backed flexible wood veneers.

June 6, 2011

WiseWood Veneer Company – Facts and Figures

WiseWood Veneer Company distributes high quality flexible wood veneer and wood edge banding from our location in Sterling Heights, Michigan. WiseWood Veneer can ship wood veneer anywhere in the United States and beyond. Our in stock inventory consists of over 300 items including flexible wood veneer and wood edge banding in a variety of sizes and different wood species. There are many options from the most common domestic species such as Maple, Cherry, Oak, Walnut, Ash, etc. to more exotic species like Anigre, Makore, Sapele, Wenge and Zebrawood. The number and variety of in stock items is continually growing in response to our customer’s needs and requests. By having such a vast assortment of products in stock we are able to ship every day to help our customers meet or exceed tight production schedules....

Read more.